NPE2018 Show Daily - Wednesday

NPE is truly ‘Breaking the Mold’ as a multifaceted experience, with activities, discoveries and opportunities to satisfy the needs of anyone who works in the plastics industry or has a need to know about plastics

Issue link:

Contents of this Issue


Page 98 of 103

WEDNESDAY NPE2018 M AY 9 TH What Do Tomato Skins and Tequila Have to do with Plasঞcs? At Ford, Maybe a Lot By Gary S. Vasilash Automove Design & Producon What does Heinz Ketchup have to do with plasঞcs and the Ford Motor Co.? Well, it's not that the PET squeeze bo•les used for the condiment are found throughout the company cafeterias. Rather, explains Debbie Mielewski, senior technical leader, Materials Sustainability, Ford, (and, notably, keynote at the 2016 Re|- focus Sustainability and Recycling Summit) the automaker and the ketchup maker are working together on finding the ways and means to use the skins from the more than two million tons of tomatoes that Heinz pro- cesses each year as fillers in composite mate- rials that would be used by Ford for compo- nents in its vehicles. That's right: tomato skins could be used in a Mustang or a Conঞnental at some point in the not-too-distant future if Mielewski and her colleagues can make it work. Looking for alternaঞves for "convenঞonal" plasঞc materials is nothing new at Ford. Back in the 1940s Henry Ford experimented with using soy beans as a source of plasঞcs. In 1941 Ford built what could be considered something along the lines of what a Saturn would be in 1990: a steel frame covered with 14 bio-based plasঞc panels. Henry Ford was not only an industrialist, but in many ways, was an agriculturalist. "I find myself doing a lot of things that Henry Ford did way back when," Mielewski says, adding, "I think he would be so thrilled." For example, while you can't buy a Ford with soy-based panels, there isn't a single new North American-produced Ford vehicle that you can buy that doesn't use soy oil for the producঞon of foam that is used for seat cushions, seat backs and headrests. The company started using soy oil for the seats in the 2008 Mustang, and by 2011 all North American vehicles use the soy-based foam. This is non-trivial, because on average, Mielewski says, there are 40 pounds of foam in a vehicle. Mielewski and her colleagues in Dearborn have been developing a variety of materials that are 1) natural, and 2) not typically other- wise used. For example, she says that they started working with farmers in Ontario, Canada, for wheat straw. Mielewski says that the usual approach to dealing with wheat straw is to "light a match and create CO 2 without any benefit." But they started using it as a filler, in place of talc, used to produce the polypropylene storage bins used in the Ford Flex. Mielewski says that even a[er the soy- foam seats and the wheat straw deployment people said that they'd never be able to re- place glass fibers. A[er all, glass fibers are highly engineered. But Ford started working with forest product giant Weyerhaeuser, which had seen the use of its pulp products in the U.S. diminish as paper producঞon moved off shore. They began tesঞng the use of cellulose fibers from trees, and in 2010 those fibers replaced glass in the armrest of the Lincoln MKX. Not only did the material meet the funcঞonal and aestheঞc require- ments, but because the natural fibers are less dense, they were able to reduce the weight of the part. At present, there are eight bio-based ma- terials used in Ford products. These include coconut-based composite materials and recy- cled co•on used for carpet and seat fabrics. Based on warranty data, Mielewski says that none of these applicaঞons have been a problem. Given that Ford sells over 2.6-million vehicles in the U.S., you'd think that it would be an easy thing for Mielewski and her col- leagues to get natural fibers everywhere. But that's not the case. She admits, "We are having a hard ঞme migraঞng it," explaining that there are a variety of reasons. For example, if a supplier is pro- ducing glass-fiber reinforced plasঞc parts, the tooling that has been cut is opঞmized for the characterisঞcs of that material, and natural fibers have a greater percentage of shrinkage. "You can't do drop-in replacement," Mielewski points out. "We have to prove to the supply base that these things can be done." For another thing, there is the issue of sources of bio-based material, which are not great for the simple reason that there isn't a huge demand for them. This explains why Ford is working with companies including Coca- Cola and Nike to expand that demand. Mielewski and her team are looking at us- ing dandelions (specifically, Russian dandeli- ons or Taraxacum kok-saghyz) as a replace- ment for natural rubber. They're considering U.S. currency that is taken out of circulaঞon every week as a source of fibers for things like coin trays. Algae is another source they're looking at. And Ford has entered into a collaboraঞon with Jose Cuervo—yes, the producer of tequi- la. They're looking at the use of fibers from the agave plant a[er the piña—the source of what becomes the liquor—has given up its fluid. Mielewski says that the organic material "is quite a•racঞve in a plasঞc part. It provides a totally different look. We are trying to influ- ence our designers to use it. I would like to see it in a green vehicle." Debbie Mielewski, senior technical leader, materials sustainability, Ford Motor Co., and her colleagues are working at finding bio- materials that can enhance the parts produced for the company's cars and trucks. 93

Articles in this issue

Links on this page

view archives of NPE - NPE2018 Show Daily - Wednesday